Mirror keeps falling of scatscan twin

[kjdiscos]

Brought a pair of these cheap, For a few gigs,

The problem being one of the mirror drops of every 24hours, Acts as an alarm clock lol,

They are attatched by what look likes double sided sticky pads, However i want to replace that with something stronger, Or what should be used ?

Any ideas ?, Or should i just replace the pads with some new ens

[Shaun]

A little bit of bostik or superglue should do the trick.

[kjdiscos]

A little bit of bostik or superglue should do the trick.

Ok shall i remove the old pad totaly ? and then superglue it ?

I could line it up again by drawing a line where they are fixed at the minute

[Cj_The_Dj]

new sticky pads should be ok. they are made with crappy ones.

[Penfold42]

If removing old pads...wipe down with a little white spirits, (to clean surface) then apply glue. :)

[kjdiscos]

Cheers guys :), Will get onto it this afternoon, After making a flightcase

[Alchemy]

Use double sided mirror tape, that won't come off.

[Sapphire Disco]

A little bit of bostik or superglue should do the trick.


Don't use super glue it won't work and will take the surface off the back off the mirror , best use impact adhesive IE you put it on both surfaces and put together just before it dries or extra strong foam fixer pads.

[kjdiscos]

Ok guys, well i have been doing my flightcases, But i will pop down to b&q and see how much ill be extorted for some impact adhesive or new pads

[Jiggles]

Epoxy resin?

[COOL HAND LUKE]

Use double sided mirror tape, that won't come off.

I agree. car rear view mirror sticky pads. clean surfaces and they will stick like :Censored: to a blanket:)