Search:

got two of them first what lead should a buy so they can link together? i have tried using xlr to xlr audio cables and they just say smart on the screen and click every now and again? and dont move...

What version off there website?

ye the cutoff frequency was definaetly around the 40hz region as below that you could tell they were bottoming out and the odd time the clip lights were blinking! mighty impressed with the stanton cd...

yep was there great day, well worth the trip from blackpool(if anyone sore me i was the one with skin head with two other lads) was impressed with intimidation stuff, lots of air being moved...

disconect one speaker and see if the other channel clips before the other if it does the speakers are iinefficient or the crossovers in the cabs are causing resistance causing clipping.

I am going to give them a call first thing tommorrow and get a pair shipped out and strip one and a-b test them side by side. yes that right subwoofer out from a behringer cx2310.

To be honest im not sure whether the class d will have either 16ohm or 4ohm drivers wired in series or parrallel?:confused: or they have a special crossover which makes the amp see 8ohms? i have had...

yes i have tops, well what it was is i have built a pair of bass bins twin 15's but sold the drivers a bit ago because i could never use them due to transport issues, now i wont to reload them but...

I will see what i can do busy finishing cabs off and where are you located in yorkshire? whats not english about that;) :D so they are a cracking speaker than what kind of venue size would they cope...

budget around £40 per driver they have sold out of drivers 8 ohms wattafe around 300rms

as i need some 15'' drivers for saturday does anybody no whether i should disconnect the tweeters from these cabs and use them with my active crossover and lie them down o n their side? no where has...

bigger amp needed inefficient speakers so you will be pushing lots of power to get a loud sound out of them.

how have you got them wired? any clip lights coming on?

what speakers are you using and what are their impedance?

bridge the amp and get a pair of 600 rms speakerss at 8 ohm wire them in parrallel so you get 4 ohms 1.2kw system in two boxes

i like to run my speakers 1-2 x the rms rating but not always possible from the different configuration of different events:mad:

ok, thanks

are you saying im right or wrong:D :beer1: bi[t puzzled:D

proel is a well established company and design very well made and sturdy stands! if it says it will hold 70kg then it will they are probably tested to twice this amount for safety issues! but when a...

thats exactly what im doing Angela, thankyou more info to come.;)



no problem jamie

http://s263.photobucket.com/albums/ii160/gillo_06/?action=view&current=frequenct.jpg

it will be fine to run the eurosys off the mixer im guessing 2 x 250 rms into 4 ohm so be around the 150 mark rms into 8 so it should cope fine, dont run the eurosys 2 off it at the same time as you...

i have currently designed a bass bin loaded with two 12in eminence delta lf drivers the cab is 150l in volume and 800mm high 400mm wide and approx 490mm deep and is tuned to 40hz response shows in...

compression drivers are usually 8 ohms its piezo's that are hi gh impedance this is why they dont alter the load on the amp

they will be fine

try it in someone elses house see if it does it then

option one remove all crossovcer from bass cabs run 18'' bin upto 80hz then 15 bass cab on kick to about 170hz (approx:) then tops from 170hz upwards this way each speaker will have its own range...