Search:

Could be Mad QStar range. Mad turned into EVL. You could try contacting them.

http://www.evl-design.com/evl-lightingprod.html

Depends on the operator!

I had this issue too. A new SD card with the files on it fixed it.

This time with a working link.

http://www.vocatem.net/abstract/clubrevolution.htm

Bit of a long shot but would any have a pair of Abstract Club Revolution they want rid of? The ones shown in the link below loaded with 150w discharge lamps.

...

Or something like this that I have used for exactly that.

http://avslgroup.com/en/product/180.607UK

15623

I would half the weight limit to 60kg though as the quality is quite average.

Colour temperature and brightness are lower with the MSD200 so probs best avoided.

Are you sure it's not the end of the lamp you are seeing in the projected image? This is quite common. It could be worse with cheap lamps. Usually looks worse when you are projecting to a surface...

You should be able to get the correct part from these guys. That's where I get my Martin spares.

http://www.entertainmentlights.co.uk/contacts/

I agree, taking red hot lamps out into a cold environment can never be a good thing. If the unit has a feature to switch the lamp off and leave the fans running then do that for 5 mins before...

1.6v should be safe. Most mixers output about 1.4v when you hit the 0db light.

£5K is a lot of cash. Do your homework and go for some listening test. You could get and HK Audio Actor DX for that which has 4x 15" subs. Something to consider

I certainly don't mind anyone using them.

As I am quite new here I thought I would break the ice by giving you guys access to some of the choons I put together a good few years ago. All for fun, nothing too serious here. Beleive it or not...

I have some cheapo LED fixtures from Music Store. Had 2 cans with bad solder joints making three leds go out in each. Quick resolder and we are good again. On a wash had three go out and two of...

You also have to consider the sensitivity of the driver and the designed crossover point. I would advise getting a direct replacement.

Anyone got any experience with Xenpow NSD-150 lamps and how they compare to Osram HTI-150/152 ?

Cheers

Thanks for the warm welcome!

Aright guys,

Just saying hello. Been DJing for about 18 years now. Club, bars, mobile, radio, done a bit of it all. Just go out a few times a year now. more of a hobby really. Do some part...