2 impossibleds
Hi all,
I have just bought another Impossibled and wondered what the best way was to use two at once. At the moment I have been using one as a stand alone unit and permanently keeping it on programme 8 I think it was.
Just need the best way to rig up a pair so I can get the best out of these lights.
Cheers, Andy
Andy
You need to change one of the units to a master and one to a slave. Get a CA-8 controller and you have the ability to blackout the units too.
I have a ca-8 with my 2 Rovers. Can i link all four together?
Andy
have them both independant pointing at the centre of the floor,when you turn 1 off turn the other onsorry depending on the size of the venue set them up how solitaire says with them linked and have 1 pointing at the floor and 1 on the ceiling
don't think so you will need a dedicated dmx desk for that, i think the rovers would be lost as an effect turned on at the same time as 2 impossiled so in my opinion keep them seperate to get the best out of bothOriginally Posted by Reminisce disco
Last edited by Jiggles; 07-12-2008 at 03:50 PM. Reason: merged
I also use the CA-8 controller with mine, Does the job perfectly
Will only work if all units have all the same channels.
But for ImpossibLED and Rovers the answer is NO. as Rovers will have a pan and tilt channel which the ImpossibLEDs won't so you can not run all the units off 1 CA-8 controller.
You could either get a second CA-8 controller or get a DMX lighting desk.
Also the American Dj Controller will work perfectly
A bit more specific - which one, there are quite a few on the market.
The UC 3
Adam F
07736 834 750
My opinions expressed here, are MY opinions, and NOT of any company I may represent, liase or work with or for.
Cheers Adam, am busy looking at dmx controllers and have not got a clue.
Hey - Just noticed, over 1,000 posts now
Posting Permissions
Reply With Quote