Our website is made possible by displaying online advertisements to our visitors.
Please consider supporting us by disabling your ad blocker.
-
faulty citronic 10:4
Hello
I've got a Citronic 10:4 as a backup.
One of the channels when i plug in via the xlr sockets on the back is quieter than the other
Signal is fine when i plug phono's into the other main output and also the booth output.
Can anyone suggest what may be wrong and if it might be fixable myself?
Cheers
Alan
-
Is the same channel low if you swap the stereo channels over ?
As an electronics engineer I would be stupid to suggest you start poking around the inside yourself.
-
Originally Posted by
nigelwright7557
Is the same channel low if you swap the stereo channels over ?
As an electronics engineer I would be stupid to suggest you start poking around the inside yourself.
Doesn't normally stop you
-
-
How old is the mixer? did it come with a warranty and is so, is it in date still? Could be worth phone up the retailer to get them to sort it out for you?
-
Originally Posted by
nigelwright7557
Is the same channel low if you swap the stereo channels over ?
No, the same channel is always quieter.
How old is the mixer? did it come with a warranty and is so, is it in date still? Could be worth phone up the retailer to get them to sort it out for you?
No it's well out of warranty.
It's not a huge problem as i can still plug in via the phono's.
My brother's fully qualified electrical engineer, if it turned out to be a common problem, and someone may known what it was, it was have saved a bit of time testing it all, but not to worry, i'll let him loose on it, i'm sure (well hoping) he finds the problem.
-
Dinosaur
Originally Posted by
[email protected]
Hello
I've got a Citronic 10:4 as a backup.
One of the channels when i plug in via the xlr sockets on the back is quieter than the other
Signal is fine when i plug phono's into the other main output and also the booth output.
Can anyone suggest what may be wrong and if it might be fixable myself?
Cheers
Alan
Output channel as in Left /Right as opposed to individual Channel 1,2,3,4?
If that's the case, I'd suspect a bad connection, or oxidised contact. Do keep us posted.
Last edited by Excalibur; 20-02-2009 at 05:46 PM.
-
-
Originally Posted by
[email protected]
Hello
I've got a Citronic 10:4 as a backup.
One of the channels when i plug in via the xlr sockets on the back is quieter than the other
Signal is fine when i plug phono's into the other main output and also the booth output.
Can anyone suggest what may be wrong and if it might be fixable myself?
Cheers
Alan
Are you aware they're made by Skytec
-
I used to have one before i got my behringer and it was good enough. Brand Snobbery here.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules