Our website is made possible by displaying online advertisements to our visitors.
Please consider supporting us by disabling your ad blocker.
-
-
Disco Dude!
kam tend to be a budget brand so hence why the bar is quite thin. Should be ok if your sticking with light led lights but if your using some weight on there I would check the spec of the deckstand to the weight you can safety use.
-
Originally Posted by
deckstardeluxe
kam tend to be a budget brand so hence why the bar is quite thin. Should be ok if your sticking with light led lights but if your using some weight on there I would check the spec of the deckstand to the weight you can safety use.
Gonna alter the bar i think just to be double sure but cheers mate
Dave
-
Also while i think of it lol length of power leads, they seem preety short to be fair so how does everyone plug them in on the bars etc ? ( they all came with a 3 pin plug ) only way i can think of is to pop a black extention lead on the bar but wont that look messy etc Please helppppp lol
Dave
-
Disco Dude!
i know some djs off the forum have black 4 ways up on the bar but I really dont like that. I run long IEC leads I think they are called into a prolight eight way switch panel which sits on top of the amp which then plugs into a 10 metre 4 way on the floor. It also allows you to quicky turn on and off any fixtures.
iec lead http://www.recycledcomputerspares.co...iecmonitor.jpg
switch panel
http://images.google.co.uk/imgres?im...a%3DG%26um%3D1
doing it this way means you can run the cables along the djs side of the deckstand and down so you dont have any cables hanging down. Get some velcro or something to tie the cables nice and tight to the deckstand. Job done.
-
Originally Posted by
deckstardeluxe
i know some djs off the forum have black 4 ways up on the bar but I really dont like that. I run long IEC leads I think they are called into a prolight eight way switch panel which sits on top of the amp which then plugs into a 10 metre 4 way on the floor. It also allows you to quicky turn on and off any fixtures.
iec lead
http://www.recycledcomputerspares.co...iecmonitor.jpg
switch panel
http://images.google.co.uk/imgres?im...a%3DG%26um%3D1
doing it this way means you can run the cables along the djs side of the deckstand and down so you dont have any cables hanging down. Get some velcro or something to tie the cables nice and tight to the deckstand. Job done.
Cheers mate ive got a big roll of velcro to tie up only prob ive got is that th lead on the tri gems is pre built in etc so looks like ill have to either adapt the cable with a 3pin adapters etc or see what i can sort
Cheers again
P.S. Any ideas on the revo issue and what i can do to make it back to what it was lol
Dave
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules