Best replacement speaker for Mackie SRM 450

[TONYTIGER]

Thats what I said - they use them in the mackies I have been told

No they do not, Eminence make for Mackie nowadays depending on model,only very old Mackies have RCF when they used to be the same company,as i said take driver out see what it is ,also put a meter on it to see if its open circuit.

[Solitaire Events Ltd]

Thats what I said - they use them in the mackies I have been told

The original Italian built Mackies had them in, but back then RCF and Mackie were under the same umbrella.

Edit - didn't see Tony's post!

[TONYTIGER]

Update The SRM 450 only takes a 12 1/2" driver so you have to use the proper Mackie replacement part no M1263W a normal 12" will not fit average cost £ 150.

Best option to recone but use a proper company.

[Digital Jack]

See here >>> http://amphospital.co.uk/mackie.php

[TONYTIGER]

See here >>> http://amphospital.co.uk/mackie.php

Good advice have used this company for repairs and spares would recommend.

[Solitaire Events Ltd]

Good advice have used this company for repairs and spares would recommend.

I have used Stan on many occasions and he does know what he is doing, but he is expensive and has been know to get things wrong. - Like insisting I'd overdriven a Mackie SWA1501 and killed it, only to find out that some muppet at Mackie had wired it to the wrong impedance.

As he assured me it was my fault and I knew I hadn't been overdriving anything, I thought there must be a problem somewhere in my system and prompted me to replace my whole sound system, costing me thousands, only to find out after that it wasn't my fault.

[Jiggles]

http://www.thomann.de/gb/mackie_sa_1...utsprecher.htm

Possibly?

[TONYTIGER]

http://www.thomann.de/gb/mackie_sa_1...utsprecher.htm

Possibly?

If you look very close it is made by Eminence for Mackie which is what i said many moons ago £ 264 for a Eminence fool and there money comes to mind.
Recone every time.