Our website is made possible by displaying online advertisements to our visitors.
Please consider supporting us by disabling your ad blocker.
-
No sure how to set this up?
http://avslgroup.com/en/product/103.112UK
Hi, I got one of these cheap as chips on ebay wanting to use it as an extra mic input and add a bit of echo but tbh im not sure how to set it up?
on the back it had left & right phono input and output along with vid in/out
on the front it has 2 jack mic inputs.
Can I use a phono-jack lead from the output and plug it into my mixer mic input? and will both mic's work this way?
Thanks
-
Originally Posted by
JSideFx
http://avslgroup.com/en/product/103.112UK
Hi, I got one of these cheap as chips on ebay wanting to use it as an extra mic input and add a bit of echo but tbh im not sure how to set it up?
on the back it had left & right phono input and output along with vid in/out
on the front it has 2 jack mic inputs.
Can I use a phono-jack lead from the output and plug it into my mixer mic input? and will both mic's work this way?
Thanks
It's a pre-amp and effects unit for the Mic's. Mic's in the front, and then phono out the back into a line level (phono) connection on your mixer. Don't connect it to the Mic input as the output level will be too high.
By the way, there's a link the manual on that page...
Julian
-
Agreed, Deffo line level out only, connecting that to a mic input will give horible distorted results and will risk blowing the transistors or preamp ic on the mixer.
-
Originally Posted by
SoundONE
Agreed, Deffo line level out only, connecting that to a mic input will give horible distorted results and will risk blowing the transistors or preamp ic on the mixer.
I use one of these so I can run "line out to mic in"
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules