Our website is made possible by displaying online advertisements to our visitors.
Please consider supporting us by disabling your ad blocker.
-
Alto TS115A Driver Replacement
The main driver (15") in one of my Alto ts115a's has blown. Does anyone know if I can source one of these drivers in the UK as the Alto website says they have no recognised dealers in this country?!! They'd only done about six gigs as well. Got them almost new of Ebay on a private buy so no guarantee either. Thought I was being clever unfortunatley. Any help gratefully received.
-
Why not ask Alto dealers. I know http://www.andertons.co.uk/ stock them and when I have had questions and called them they have been very helpful.
-
Thanks Chrisj, I'll give them a try.
-
Just to close this out in case my experience is useful to anyone. The 15" driver on these is dead easy to get out. Just take the front grid off and there it is. Screws out and unclip the leads - (I did put a spot of solder on the new driver clips as they don't seem as secure). I tested the good one from the working speaker in the cab and confirmed the 15" driver was indeed not working. After some research I have replaced it with an: Eminence Delta 15a 15"
Nominal Impedance*
8 ohms
Power Rating
Watts
400W
Gigged it over the weekend and all seems fine. Watch the other one go now!
-
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules