Our website is made possible by displaying online advertisements to our visitors.
Please consider supporting us by disabling your ad blocker.
-
showtec lighting controller
Hi guys I'm having problems with my lighting controller I have daisy chained 4 par cans 3 light up but fourth one is not responding.
Nothing wrong with lights it does work.
This lighting controller https://www.google.co.uk/aclk?sa=l&a...Qwg8IIQ&adurl= thanks in advance
-
Originally Posted by
simon1969
Hi guys I'm having problems with my lighting controller I have daisy chained 4 par cans 3 light up but fourth one is not responding.
Nothing wrong with lights it does work.
This lighting controller
https://www.google.co.uk/aclk?sa=l&a...Qwg8IIQ&adurl= thanks in advance
Don't want to teach granny to suck eggs......have you checked and replaced the cable to the fourth PAR?
-
Are all fixtures set to the right address?
-
Originally Posted by
Imagine
Don't want to teach granny to suck eggs......have you checked and replaced the cable to the fourth PAR?
All brand new cables .
-
I had the same issue with my ADJ t par profiles a few years ago. Fixed by adding a DMX terminator to the last light in the chain.
No idea if it will help you though.
-
Originally Posted by
fullcontact68
I had the same issue with my ADJ t par profiles a few years ago. Fixed by adding a DMX terminator to the last light in the chain.
No idea if it will help you though.
That was one of my next suggestions.
Also - what happens if you move the non-worker to lower in the chain (i.e position 1 or 2)?
-
Dinosaur
Just check that the errant one is set to the same number of channels as the rest. I've had this with an odd one set to 3 or 5 channel DMX when it should be 4, for example.
-
Originally Posted by
Nakatomi
Are all fixtures set to the right address?
Didn't think you would need to because of controller and dmx cables ?
- - - Updated - - -
Originally Posted by
Excalibur
Just check that the errant one is set to the same number of channels as the rest. I've had this with an odd one set to 3 or 5 channel DMX when it should be 4, for example.
OK thanks ill check
-
Originally Posted by
simon1969
Didn't think you would need to because of controller and dmx cables ?
Well you didn't say how you intended to use the controller with the lights - all on the same address (all the same colour), or maybe alternating colours... or whatever
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules