Our website is made possible by displaying online advertisements to our visitors.
Please consider supporting us by disabling your ad blocker.
-
I need a new knob!
I turned up to an event the other day and found my bass knob had been sheered off. I think this was from a house party and my inkling is that one of the drunk idiots surrounding my kit, when I had packed up sat on it (its on wheels) its fallen over on something? Can anyone suggest how and where I can fix this. I have not had time to look at it, but I have an LD dAVE 10 so may have a spare? I have mo issues doing this myself so any advice would be good. I intend to open it up tomorrow.
Hopefully its an easy fix?
Thanks
-
Thank you Toby - I've just had to wipe a fine Merlot from my laptop screen and keyboard after reading the title of this post!
If you've got a spare knob, it should just be a case of using a pair of pliers to remove the remainder of the old knob (it'll be sitting on a knurled shaft), and replacing with said new knob.
Disclaimer.......you have no idea how hard it was not to insert double-entendres into that reply!
-
with 2 kids in such a short sp... oh wait.. different subject!
From the photo it looks like the shaft has been sheared right off! That means you'll likely have to replace the whole volume control. Potentially quite an easy fix once you get the box open but how easy depends on how the board with the volume control is populated.
Last edited by Nakatomi; 24-11-2017 at 10:01 PM.
-
-
So its my knob shaft that needs looking at then? Lets hope its not too hard to do. My first priority is locating the dry ice delivery that did not turn up yesterday!! I used it in the same venue last week and used the Yamaha for bass control.
-
Dinosaur
Originally Posted by
yourdj
So its my knob shaft that needs looking at then? Lets hope its not too hard to do. My first priority is locating the dry ice delivery that did not turn up yesterday!! I used it in the same venue last week and used the Yamaha for bass control.
Dear me Toby, amidst all the " Carry On " humour afforded by your predicament, from the piccies you've given, I believe Wayne is spot on. It looks as if your Potentiometer adjustment control ( Knob for those with infantile minds in the gutter ) was in two parts. The outer plastic part, and an inner sleeve, which has splines to engage with the shaft of said Potentiometer./Variable Resistor. ( I don't know which is the correct technical term, there may be a hair or two to split here )
It appears that while the outer part has come off,the sleeve has remained in place, and that's the bit Wayne was suggesting you remove very carefully with pliers.
You can carefully check the theory by removing another one for comparison.
This will allow you to replace the item with a new one. Don't throw the sleeve away, it will act as a pattern for when you wander into the Disco shop ( or Maplins, mayhap ) and send the staff into fits of giggles by repeating your plight to them.
Last edited by Excalibur; 02-12-2017 at 05:20 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules