Our website is made possible by displaying online advertisements to our visitors.
Please consider supporting us by disabling your ad blocker.
-
Just a quick one...
Afternoon all
Banging my head against the proverbial brick wall at the moment. I have one of the Equinox Micron cloths (white) which I retired a little while ago due to having LEDs out.
I've had the chance to take it all to bits this afternoon to have a look (it's eventually being re-purposed into the Rustic booth) and I've identified the culprits (just two but they affect an awful lot of others).
Anyone know what spec of LED I'm looking for? I can't see anything on the LEDs themselves, and hunting on line is drawing a complete blank at the moment
-
Contact prolight. They should be able to sell you some LEDs. Careful though, they charge a flat tenner plus VAT shipping if I remember right.
If you don't fancy paying those extortionate carriage fees though I'd probably verge on replacing ALL the LEDs with warm white ones for literally a few quid. You could get just about any cool white LED to replace the handful of duds you have & they'll work but you'll have no guarantee the colour will match.
-
Originally Posted by
Nakatomi
Contact prolight. They should be able to sell you some LEDs. Careful though, they charge a flat tenner plus VAT shipping if I remember right.
If you don't fancy paying those extortionate carriage fees though I'd probably verge on replacing ALL the LEDs with warm white ones for literally a few quid. You could get just about any cool white LED to replace the handful of duds you have & they'll work but you'll have no guarantee the colour will match.
You might have a plan there....I quite like the idea of converting to cool white instead of the stark bright white that's in there at the moment.
I'm assuming these would do the job? (In case it doesn't work, I'm looking at 100 of the warm white 5mm)
-
-
The wiring in every cloth I've ever seen is the primary reason I refuse to buy into the starcloth thing. All the equinox ones are Jerry rigged. Soldered connections instead of crimped (you don't solder any wire that's gonna flex near the join if you want it to last), no discernable pattern to the hookup... (Inside their controllers, supply rail positive is both red AND black!)... In short they're just CRAP.
Your best bet might be to buy an led controller with say 4 channels & directly control it with dmx. Or.. at a push get a new cloth made, sorry.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules