dynarocks dynamo linking problem

[dj wayne]

Hello all hope you are well just wondered if anyone has had this problem i cant get my dynarocks to work master slave with my dynamos they are all the 250 watt version i was told by the shop where i got the dynarocks that this is a know problem and an upgrade chip for the dynarocks is on the way i have asked prolight via email about this but no reply does anyone know if they have a phone number unable to find one on there website i did notice that the chip in my dynarocks was version 1.1 and the one in my dynamos was 1.3 any advice greatfully received thanks all.

[GrahamH]

If im wrong im sorry but DMX is DMX and linking the two together shouldn't be a problem. the chips are just eproms for the programming. Have you set the addresses right on the master and slave.
Master dipswitch 1 on and all the rest off and slave should have 2, 3, and 10 on.

[bank]

Try using the dynarock as a master, so use its dmx out, them plug into the dynamo's. Or if you've two dynarocks, plug the out from the first into the in of the other dynarock, then into the dynamo, surely that should fix it if that is the case.

[rob1963]

*Waits to see how long it takes Shaun to move this to the technical forum*

:rolleyes:

[djdarren]

there was a problem with the orignal dynarocks and master slave.

contact prolight via there website but realy its your dealer that should be sorting out the ic's for you (and fitting them)

[groovy-nights]

Not sure you can plug the dynarocks with the dynascans.Try linking one rock to one scan and see what happens.I think you may need a dmx desk and program them.
Try these settings
scan dip switch 1 on
scan dip switches 1 and 3 on
Rock dip switches 1 and 8 on
Rock dip switches 1,4 and 8 on
Scan dip switches 5 and 2 on
Scan dip switches 2,3 and 5 on
Try linking a rock to a scan only and see what happens

[Solitaire Events Ltd]

I get the impression that Wayne wants to master and slave link them, rather than DMX using a desk.

[dj wayne]

Hello thanks for the advice everyone i have tried everything no reply from prolight via email i think i will have to sell my 2 dynarocks a buy 2 newer ones to sort out the problem my dealer wont change them iv had them for 4 months now

[groovy-nights]

try ringing prolight much quicker

[Solitaire Events Ltd]

try ringing prolight much quicker

Er....:rolleyes:


does anyone know if they have a phone number unable to find one on there website

:D

[spin mobile disco]

Had thr same problem with my dynamo's and dynarocks. I simply use a dmx controller rather than master slave to fix the problem. been meaning to get them chipped but keep forgetting.

[dj wayne]

Hello all thats the problem i cant find a phone number for them on the website if any one knows it could they let me know please thanks

[groovy-nights]

0870 7503900

[dj wayne]

hello this is the problem i cant find a number for them anyone know it please ?

[dj wayne]

many thanks mate willring them now much appreciated

[DaveyG1980]

are you able to link the dynarocks with the 100 watts dynamo's and also what do you mean by getting them chipped?

[DaveyG1980]

forgot to say

pleaseeeeeeeeeeee.

[dj wayne]

ok thanks everyone prolight are sending me 2 new chips for my dynarocks they said there was a problem with the first ones made if you have 1.1 on the chips they will need changing just so you all know might save you messing arround for hours like me trying to work out what i was doing wrong they did say that they will not work with the 100w versions.

[Sapphire Disco]

Where are the chips located how do change them ?
Thank you in anticipation