PDA

View Full Version : LED Pars settings Master - Slave


Dillmiester
30-01-2008, 12:38 PM
Hi all
Ive been using my LED Pars with DMX but for this weekends smaller gig I want to turn them back to Auto mode but i cant remember the settings.
The instructions states "Auto" mode is all dips off but it does not mention "master" and "Slave" configuration (I want them doing the same thing in "Auto" mode).

As a side note, in Auto one of them seems way more sensitive to music than the other. Which is not good as one goes mad and the other slowely changes. Anyone had this problem???

These are the Starville Pars from Thomann

Cheers
Solitaire Events Ltd
30-01-2008, 12:46 PM
Have you got a link to the ones you have?

If they are the cheap Thomann ones, you'll probably find that they don't do master and slave.
Dillmiester
30-01-2008, 02:07 PM
Have you got a link to the ones you have?

If they are the cheap Thomann ones, you'll probably find that they don't do master and slave.

Hi, yes its these
http://www.thomann.de/gb/stairville_led_par_56_alu_schwarz.htm
STAIRVILLE LED PAR 56 ALU SCHWARZ

ta
spin mobile disco
30-01-2008, 05:34 PM
They dont's have master slave mode on them. I have a set and its quite frustrating sometimes.
Solitaire Events Ltd
31-01-2008, 11:24 AM
They dont's have master slave mode on them. I have a set and its quite frustrating sometimes.

Yep, I had two as well, but thy are now living at Sam's house as I didn't realise they didn't master and slave either. :o
Dillmiester
31-01-2008, 07:41 PM
Ah well, never mind.
Thanks guys.
Sam
31-01-2008, 08:38 PM
Yep, I had two as well, but thy are now living at Sam's house as I didn't realise they didn't master and slave either. :o

They are indeed!
Good fun they are too!

Personally I don't mind as I control all my DMXable stuff anyway.. :rolleyes: