Fitting a cooling fan to an amp

[ppentertainments]

I have a small PA system mainly used for race nights and speeches. It does not have a cooling fan and was wondering if it is possible to fit one.

If so, how, where to buy etc.

Thanks in advance

[mldiscos]

you could do something along the lines of what i saw a few years back, someone had cut a hole into the top of the amp casing and bolted in a plastic fan something along the lines of one of these type fans

http://www.terralec.co.uk/misc_hardware/cooling_fan_240v_120mm/16478_p.html

http://www.terralec.co.uk/misc_hardware/92mm_fan_230v/16411_p.html

but rember a couple of things:

1.you will have to put a grill over the fan blades

2.MOST IMPORTANT GET THE ITEM PAT TESTED To make sure that it's sounds

grills:

http://www.terralec.co.uk/misc_hardware/finger_guard_for_92mm_fan/16412_p.html

not sure whether you could just wire it direct into the mains input of the amp as they are 240volt fans anyway, maybe something you could look into.

[JAMdisco]

How about one of these

It already has a safety grill so might save a few bob there!:D

[One Vision]

You can actually buy a unit that has these fans fitted that fits under your amps, they are either a 1u or 2u system not sure.
Ideal if running at 4ohms just to give that extra cooling

[ppentertainments]

How about one of these

It already has a safety grill so might save a few bob there!:D

Good idea but can't find a flight case to fit !:D