PDA

View Full Version : Mirrorballs



Royalblue
18-06-2008, 12:16 PM
Hi folks

Am thinking of buying a mirror ball as part of my rig. I have a few questions.

1. How to attach a motor to a goal post or T-Bar.
2. Suitable par can to light it with.
3. How can I turn the can on and off easily.

I know this has been covered before but I couldn't find the exact answers.

Thanks

Solitaire Events Ltd
18-06-2008, 12:32 PM
If the motor housing is big enough, then you can do what I do and have the bolt from the clamp through a hole in it.

Par cans are not great for mirror balls as the beam isn't tight enough. You need to use a par 36 or 56 pispot, colour changer, scanner or moving head.

http://i197.photobucket.com/albums/aa260/daz2410/IMG_5793-1-1.jpg

Use a normal plug and a switchable 4/6 gang to turn the spot or effect on or off.

Royalblue
18-06-2008, 12:35 PM
I had a chat with terralec and they suggested something like that. I think that's what I will do. Thanks Darren :)

UltraBeat Entertainment
18-06-2008, 01:02 PM
I think its amazing how many people are now going back to this classic effect even after all the intelligent effects that are around these days.

Whats next the return of the fuzz light:rolleyes:

Royalblue
18-06-2008, 01:30 PM
I think its much the same as anything. Things go in and out of fashion as time goes on

Solitaire Events Ltd
18-06-2008, 02:27 PM
I also think that the mirror ball has always looked classy and the same couldn't really be said of a fuzz light, could it?

ppentertainments
18-06-2008, 04:25 PM
I also think that the mirror ball has always looked classy and the same couldn't really be said of a fuzz light, could it?

Totally agree.

Do you need to light the mirrorball from both sides to get a good effect or is lighting from one side sufficient to 'fill the floor'?

Solitaire Events Ltd
18-06-2008, 05:10 PM
Hard to tell as I use one at each end!

Dragonfly
18-06-2008, 06:37 PM
I have 1 centrally and light it from both sides.

Royalblue
18-06-2008, 06:44 PM
Well I've ordered the kit through terralec and they have agreed to drill through the motor (housing) and attach a clamp to it and ordered a couple of pinspots to go with it.

Dragonfly
18-06-2008, 06:47 PM
I found pinspots looked a bit plop so I use mojo colour changers (see terrelec website ) one either side.