PDA

View Full Version : Are these any good?


yourdj
15-10-2008, 05:45 PM
http://www.djanddiscostuff.com/prodmed/1802.jpg

I have a prolight ABS 8u amp rack. to my surprise it has last ages!
Not the strongest kit, but it does not weigh much.

http://www.djanddiscostuff.com/prodmed/1803.jpg

The rack is normally on my bass bins denon s1000 decks on top.

I am looking at a case to house my Denon DNHD2500. It needs to be easily transportable and i cant seem to find anything similar to my Gig Skinz bag (to fit a 19inch rack mixer and Denon dnhd) thats any good?

The Prolight amp rack has grooves on top and dips underneath for stacking. The slant rack above does not. That would have been great for drunk idiots falling in to it.

Anyone know if they do these rack with the groove.

http://www.dolphinmusic.co.uk/shop_image/product/a58605e925014b39635c2018576af76a.jpg

The Kam case with mixer top seemed the best option.

http://www.djanddiscostuff.com/prodmed/2527.jpg

Any suggestions great :)
nigelwright7557
15-10-2008, 09:33 PM
I wouldnt recommend putting anything on a bass bin.
Over a long period of time electronics dont like vibration.

Amps in active enclosures usually have shock mounts.
Shakermaker Promotions
15-10-2008, 09:36 PM
I have a 'road ready' version of that Kam flightcase and it's spot on.
I have my Denon HD2500 in it with a Numark CM200FX Mixer.
deltic
16-10-2008, 06:52 PM
i have the kam case in the bottom picture spot on

in the case i have numark cm200 usb mixer,numark d2 and a kam twin uhf radio mic,and laptop sits on sliding shelf.

picture in gallery section.
spin mobile disco
16-10-2008, 07:27 PM
Vibration will in the end destroy most things. Electronics using crystals in the timers etc are no exception. Don't do it is my advice. And screws are very easy to undo with vibration so watch out.
yourdj
17-10-2008, 04:47 PM
i have the kam case in the bottom picture spot on

in the case i have numark cm200 usb mixer,numark d2 and a kam twin uhf radio mic,and laptop sits on sliding shelf.

picture in gallery section.

Did you add the racking for radio mic bit yourself as it not present in the catalogue?

What do you recon to this?

Its just over a meter long and can also hold my dns100's. Will fit on a giraffe stand and be wheeled in and out of venues?

Defeats the purpose of going digital, but i like to have the back up of cd's too.

http://www.roadreadycases.com/products/large/RRDJCD19W_L.jpg