chauvet bubble king

[djmarc]

hi i have just brought a second hand chauvet bubble king off ebay. I dont have a manual with it, I search google for the manual in which i found with no problem

After looking at the manual it does not cover what im looking for so if any of you have the chauvet bubble king 550 could u please guild me on how to take out the plastic tray in the machine so i can empty the fluid i put in to test the machine

ps im in destrate need to find out so anyone out there with the same machinee please help me out sorry to post in this forrum i did try tech but no reply so im trying this forum.:bang: :bang:

thank you
mark

You, not U.

[Tom]

I quote this from the manual. Don't know if its going to help at all.



Cleaning

Cleaning your bubble machine regularly will help reduce costly parts replacement and repair charges.

After every 40 hours of continuous operation or when the machine will be idle for a long time it is
recommended to rinse the bubble wands and fluid tank with warm water, to prevent a build-up of residue which could reduce performance.


1. Unplug the unit.
2. Empty all bubble fluid from the tank and replace with warm water. Plug unit in and allow to run
as usual, until all wands appear to be free of residue.
3. Cleaning is now complete. Unplug and refill with bubble fluid.


All bubble machines are prone to clogging due to the consistency of bubble fluid. However a well
maintained machine should provide years of reliable use. The body of the unit may be cleaned with a soft damp cloth. Store dry.

http://www.chauvetlighting.com/products/manuals/b-550_ug-218.pdf

[djmarc]

hi tom thanks you like i said iv downloaded the manual but it dosent say how to remove the tray.

im really stuck cos i dont want to tip the machine up as the remainder of the fluid will go everywhere in the machine

it does say remove the detactable tray but i cant seem to see how

and also the travel in the car this weekend will be a nightmare the disco im doing this week is a anniversairy and they have instisted on the bubbles for the first dance

thanks

mark

[spin mobile disco]

on my bubble machine (different make though) It has 2 screws either side you loosen and the whole top hinges up. Then you can take the tray out for rinsing. I have 2 bubble machines and it is the same for both.

[DJ Davy]

I have one of these... fantastic machine, but if you do not clean and dry it it starts to rust. . . like mine! As stated above, you remove the front duct and the two screws at the sides, then hinge the top half up to access the tray. The problem I have found is once open, you have to support the top half of the machine, how do you lift out the tray? I keep a small wooden wedge to hold it open to get the tray out... and also a small funnel to aid pouring the fluid back into the bottle. Hope this helps!