Wanted: iec distribution panel

[Daryll]

Ok guys and gals.
I need a 19" rack IEC mains distribution unit.

Specs:

outlets must be on the back.
each outlet switched from the front panel.
between 4 and 8 outlets.

no more than 150mm deep ( less if possible)

Cheers

Daryll

[Vectis]

Ok guys and gals.
I need a 19" rack IEC mains distribution unit.

Specs:

outlets must be on the back.
each outlet switched from the front panel.
between 4 and 8 outlets.

no more than 150mm deep ( less if possible)

Cheers

Daryll

Wish you'd've said the other day before I sent the lasers - I've got one sitting in the store doing nothing - 1U panel, 8 neon switches on the front, 8 IECs out the back, single 13A input. Not measured but 12-15cm deep sounds about right.

I'm heading up to Reading via Pompey next Wednesday morning if you want to arrange a meet somewhere not too far out of my way and you can have it for £20.

[Excalibur]

Not at all sure these come near your requirements, but best I can do. If you look round CPC, you might be able to build one from a rack strip, and individual items.

[Solitaire Events Ltd]

Or if you don't go for Martin's, then Ebay (http://cgi.ebay.co.uk/DJ-8-SWITCH-PANEL-8-FREE-IEC-PLUGS-BRAND-NEW_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1683Q7c66Q3a2 Q7c65Q3a12Q7c39Q3a1Q7c240Q3a1318QQ_trksidZp3286Q2e c0Q2em14QQhashZitem380113610007QQitemZ380113610007 QQptZUKQ5fConElecQ5fLightingLEDsStrobesQ5fRLQQsale notsupported) is your friend.

[Vectis]

Yep - it's just like that one.

Just measured and its 110mm deep.

[Daryll]

Thanks everyone.

PM sent to Martin :D :beer1:

Daryll

[Bouncy Dancefloor]

http://www.solotechnic.co.uk/acme-pc-08-effects-controller-i29171.html

thats the one you need, ukdj also have them for £26

[Sapphire Disco]

Just got one of these today looks good nice quality, just need to make all light cables the right length and my lighting should go up in half the time, also less cables to worry about.

http://www.djsuperstore.co.uk/item/lighting-controllers/228513-prolight-transcension-show-director-%C2%A384.99

Quite looking forward to using it with my new ultimax winch stand when I get, which should be in within the next week.

[JDB Entertainment]

I have 1 of these aswell! Great little piece of kit! As you say cuts down on setup time as can leave all wires prewired into the back! :D