One Sub Output To Two Inputs

[djderek1971]

Can anyone plase advise as the the correct way to wire this. The mixer I use has a L and R XLR outputs which go to my amp. That is fine. The mixer also has ONE Sub XLR output however the active SUb I use has a L and a R input, but not a mono input. Should I

A) Just plug into ont of the L / R inputs as I have been doing
B) Get some kind of splitter and plug into L and R on the sub
C) Neither

Sub is a Peavey Messenger Pro
Mixer is a Behringer VMX1000

Any advice would be appreciated.

Ta

[Excalibur]

B.The sub output is mono, so no probs there. There's no hi out on the sub, so you can't go sub first, then into tops ( unless you run the tops full range, as many folk do )
The ( French :bang: ) manual for the Behringer says the sub output is XLR. Thus, something like
http://cpc.farnell.com/pulse/pls00257-psg01369/lead-xlr-skt-to-2x-xlr-plug-1-5m/dp/AV14537?Ntt=av14537
should do what you want.

[djderek1971]

Perfect, thanks for that!