Winch and wheel question

[DJ Frankie]

Hi all

I have a 4ft winch and wheel frame and would like to mount two moving heads that I have to either end of the bar?
But my question is can they be mounted safely to the TrussLite straights or would I need to purchase the triangular truss to do this, if so would this work with the winch and wheel frame???

Frankie

[flatliners]

what moving heads you putting up

[DJ Frankie]

This is gonna sound silly but there is no name on them?? I purchased them from a chap (Eddie) who has given up the disco buisness but unfortunatley they didnt come with any manuals or branding, although they do look very simular to the Thomann ones here:

http://www.thomann.de/gb/stairville_mv250h_moving_head_elc.htm

I must stick a picture up on the forum to see if anyone knows what make they are.

[Sapphire Disco]

Went on absolutely fine on my 3m Ultimax bar, but I did bolt them directly on by the flat bracket on the base, didn't use a hook type hanging bracket.

[deltic]

think CJ hangs his from an ultimax bar.

[alanni1]

I have 2 Stairville MV250H mounted on the 3 m Trusslite above the winch and wheel stand and have expereinced no problems. I used the bracket which comes with the lights and screws to the base and then mounted on trusslite with a G Clamp. The only downside is the the moving heads to have a tendancy to hang slightly to one side, but when the lights are down this is not noticable.

Link to Picture (http://www.forum.mobilediscodirectory.co.uk/showthread.php?t=24358)

Alan
SoundWave Entertainment

[Cj_The_Dj]

I have 2 Stairville MV250H mounted on the 3 m Trusslite above the winch and wheel stand and have expereinced no problems. I used the bracket which comes with the lights and screws to the base and then mounted on trusslite with a G Clamp. The only downside is the the moving heads to have a tendancy to hang slightly to one side, but when the lights are down this is not noticable.

Link to Picture (http://www.forum.mobilediscodirectory.co.uk/showthread.php?t=24358)

Alan
SoundWave Entertainment

yes i done the same as you...

[DJMaxG]

They also Look like the Acme ISolution Moving heads.