Which flightcase?

[Alchemy]

Can anyone recommend a suitable flightcase to house a Numark C2 mixer, a Cortex HDC1000 and a Stairville DMX Master1? I have been staring blankly at pages of them for hours now and I've come to the conclusion that I either need to see them installed or get advice :( . I am going to have to mail order so I don't want to :Censored::Censored::Censored::Censored: it up. Any photo's would be very helpful.

2011 is my year of sorting everything out. In my quest for the 1hr set-up I am re-wiring my lights, going DMX and flightcasing my playout (apart from laptop)

Thanks Guys :beer1:

[Megamix]

Not sure of size you'll need but the Citronic range are very economical but built solidly - no regrets buying one of them.

[Alchemy]

Not sure of size you'll need but the Citronic range are very economical but built solidly - no regrets buying one of them.

Yes, I agree, I have been looking at their website. Trouble is I don't know my U's from my elbow :D and I can't work out which one is best.

[Corabar Steve]

U'll (pun intended & It's not technically txt spk) need to take into account where the connections are on the equipment if you want to house them in the same case they look recessed on the DMX Master, but aren't on the mixer.

I presume you want them all on a slant of the case? What order top to bottom were you planning on having them?

[Corabar Steve]

Looks like you'll need at least 10U, both the mixer & controller are 4U & the Cortex is 2U

I'd say a minimum of this http://www.djkit.com/product.php?id=3369&cat=208 (which would also give you room for a keyboard drawer for the Cortex) Although this would mean having the DMX Master at the front.

This fella http://www.djkit.com/product.php?id=5080&cat=208 in conjunction with some blanking plates would mean you could put them in any order you want as the mixer sockets can be kept clear of obstruction.

[Alchemy]

U'll (pun intended & It's not technically txt spk) need to take into account where the connections are on the equipment if you want to house them in the same case they look recessed on the DMX Master, but aren't on the mixer.

I presume you want them all on a slant of the case? What order top to bottom were you planning on having them?

Yes, I was looking at slanted cases in preference, and I was thinking (from the top) cortex, mixer, DMX.

Thanks for U'r help :D

[Corabar Steve]

In that case (no pun intended that time) I'd go for the 12U slant with a 2U blanking plate between the Cortex & the mixer. You'll be able to access the connections on the back of the mixer without too much bother.

Although of course this leaves no leeway should you wish to upgrade to a HDC3000, or a HD2500

[Alchemy]

In that case (no pun intended that time) I'd go for the 12U slant with a 2U blanking plate between the Cortex & the mixer. You'll be able to access the connections on the back of the mixer without too much bother.

Although of course this leaves no leeway should you wish to upgrade to a HDC3000, or a HD2500

Thanks Steve, very helpful advice :beer1: . I don't think I will be upgrading the Cortex as it's only my backup.