Advice on a lighting controller flight case

[yourdj]

i need a flight case that holds the following items too sit next to me in a confined space pre wired. any suggestions welcome.

http://www.soundlightuk.com/shop/product_images/g/926/obey4-1-l__38828_zoom.jpg

http://1.bp.blogspot.com/_cpT7mVcAO5w/SxBWfoIIkaI/AAAAAAAAACM/adbbnnIV970/s1600/Behringer+502.jpg

http://www.entertainmentwarehouse.com.au/catalog/images/AKG%20WMS%20450%20HTD%20Vocal%20%20Wireless%20Set. jpg

thanks :)

[Excalibur]

Well without ears on two of the items, I reckon you're already heading rapidly down the custom build road.

[yourdj]

Well without ears on two of the items, I reckon you're already heading rapidly down the custom build road.

That was my thoughts. I can secure the two other items with velcro though too the base of a case?

[yourdj]

This sort of thing seems the best option. Pick and pluck foam insert types.
can anyone recommend a good supplier with ones where the lid can be removed?

http://i01.i.aliimg.com/photo/v0/202158433/Extra_Large_Audio_Carrying_Aluminum_Case.jpg

[yourdj]

I have found the swan case to be the best. (unless anyone knows differently).

Is this large enough (allowing cable access out of the back of the mic and top of the mixer, back of the controller).
if its large enough I could include the power too? It will cut set up by a couple of mins and limit any technical failure.

1x Strong butterfly catch on the front with loops for a padlock holds the lid closed (padlock not supplied).
Hinged lid.
Techno handle on the end.
Ball Corners
Panels - 5.5mm white rigid PVC coated plywood.
Foam filled with Pick & Pluck puzzle foam which sections can be removed as desired.
Maximum internal pluckable area 400mm(L) x 280mm(W) x 60mm(H)
Profile foam in the lid will allow an extra 10mm of height = 70mm(H)
External 480mm(L) x 360mm(W) x 140mm(H).
Weight approx 4kg.



http://i85.photobucket.com/albums/k58/bus_ter/DSC_0021.jpg

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200622908415