blitz
20-10-2011, 08:05 PM
Ultimax wheel and winch stand used so usual scraps etc with keeping it in bag and moving about
This is the 4ft version but i also have the 2ft side pieces for when you want a nice compact stand or you can join the 2ft and the 4ft together to make a 6 ft stand.
2 x ultimax winch pods, with the sureloc collars, think they are 60kg capacity and go to 3m, nice sturdy winches
The overhead is the ultimax dual truss 2 x 1.5m given a 3m span, i have prewired the truss for quickness when setting up for power and dmx, each piece of truss has 4 power iec o n flying cables all being powered off one 13a mains plug and the dmx cables are in place for the lights with only one conection needed from your controller, this gives you 8 power/dmx evenly spaced over the 3 m span, there is also another bit of 1m dual truss which is not prewired and is handy for very small set up or adding in to give you a longer span when you are using it as a 6ft stand.
8 clamps for the truss
home made wooden shelfs, one 4ft the othere 2ft
Ledj star cloth, ive added velcro to the top of the cloth and to the top bar on the ultimax to make it easier and quicker to fit, you only then have to stretch it round the sides and fasten with the velcro tabs, as you probs all no most deck clothes dont go all the way round the stand but it looks resnoble.
Genuine ultimax bag for the stand, seen better days but still functional, seperate long bag for the truss.
Bad bits, as i say its used so got scrapes etc from being in the bag/assembled, a few of the plastic hand screws for the side sections are broken (they make these out of far to brital plastic) but are still usable and i think if i remember right one of the brakes on the wheels is cafunkt.
So thats
1 wheel and winch stand 4ft with prewired dual truss (3m span)
2 2ft side pieces
2 homemade wooden shelves, one 4ft, one 2ft
8 clamps for truss
ledj star cloth and psu in case
ultimax bag for stand
long bag for trussing
£350 for the lot
12890
12891
This is the 4ft version but i also have the 2ft side pieces for when you want a nice compact stand or you can join the 2ft and the 4ft together to make a 6 ft stand.
2 x ultimax winch pods, with the sureloc collars, think they are 60kg capacity and go to 3m, nice sturdy winches
The overhead is the ultimax dual truss 2 x 1.5m given a 3m span, i have prewired the truss for quickness when setting up for power and dmx, each piece of truss has 4 power iec o n flying cables all being powered off one 13a mains plug and the dmx cables are in place for the lights with only one conection needed from your controller, this gives you 8 power/dmx evenly spaced over the 3 m span, there is also another bit of 1m dual truss which is not prewired and is handy for very small set up or adding in to give you a longer span when you are using it as a 6ft stand.
8 clamps for the truss
home made wooden shelfs, one 4ft the othere 2ft
Ledj star cloth, ive added velcro to the top of the cloth and to the top bar on the ultimax to make it easier and quicker to fit, you only then have to stretch it round the sides and fasten with the velcro tabs, as you probs all no most deck clothes dont go all the way round the stand but it looks resnoble.
Genuine ultimax bag for the stand, seen better days but still functional, seperate long bag for the truss.
Bad bits, as i say its used so got scrapes etc from being in the bag/assembled, a few of the plastic hand screws for the side sections are broken (they make these out of far to brital plastic) but are still usable and i think if i remember right one of the brakes on the wheels is cafunkt.
So thats
1 wheel and winch stand 4ft with prewired dual truss (3m span)
2 2ft side pieces
2 homemade wooden shelves, one 4ft, one 2ft
8 clamps for truss
ledj star cloth and psu in case
ultimax bag for stand
long bag for trussing
£350 for the lot
12890
12891