No sure how to set this up?

[JSideFx]

http://avslgroup.com/en/product/103.112UK
Hi, I got one of these cheap as chips on ebay wanting to use it as an extra mic input and add a bit of echo but tbh im not sure how to set it up?
on the back it had left & right phono input and output along with vid in/out
on the front it has 2 jack mic inputs.
Can I use a phono-jack lead from the output and plug it into my mixer mic input? and will both mic's work this way?

Thanks

[DJ Jules]

http://avslgroup.com/en/product/103.112UK
Hi, I got one of these cheap as chips on ebay wanting to use it as an extra mic input and add a bit of echo but tbh im not sure how to set it up?
on the back it had left & right phono input and output along with vid in/out
on the front it has 2 jack mic inputs.
Can I use a phono-jack lead from the output and plug it into my mixer mic input? and will both mic's work this way?

Thanks

It's a pre-amp and effects unit for the Mic's. Mic's in the front, and then phono out the back into a line level (phono) connection on your mixer. Don't connect it to the Mic input as the output level will be too high.

By the way, there's a link the manual on that page...

Julian

[SoundONE]

Agreed, Deffo line level out only, connecting that to a mic input will give horible distorted results and will risk blowing the transistors or preamp ic on the mixer.

[ultrasound disco]

Agreed, Deffo line level out only, connecting that to a mic input will give horible distorted results and will risk blowing the transistors or preamp ic on the mixer.
I use one of these (http://www.shure.com/americas/products/accessories/microphones/microphone-problem-solvers/a15la-15-db-attenuator) so I can run "line out to mic in" :beer1: