adj mega go bar 50

[soundmaster mobile disco]

Hi there i recently bought the adj megago bar 50 (the battery operated ones),i also have the hand held remote controller that was supplied in the box.

My question is this how do i get it onto a static colour,ie press the red button,nothing happens,same with blue and green.

I do have the setting on for the controller as i can skip through the options colour change programme up and down,black out ect

They have 32 built in colours but only 1 of them is a single colour (blue)

Your advice please on the best way to opperate these lights

[BossmanKaraokeDisco]

Hi there i recently bought the adj megago bar 50 (the battery operated ones),i also have the hand held remote controller that was supplied in the box.

My question is this how do i get it onto a static colour,ie press the red button,nothing happens,same with blue and green.

I do have the setting on for the controller as i can skip through the options colour change programme up and down,black out ect

They have 32 built in colours but only 1 of them is a single colour (blue)

Your advice please on the best way to opperate these lights

If they are like the mains version you press the colour button and then the plus or minus button to set the value 1 - 255 I think from the top of my head, you can then mix in the other colours as required to give you the finishing colour.

Hope this helps :beer1:

[sxboy]

Also each time you select a different programe, say sound active, then you want a static clour, you have to press the "select prog" button first (top right button on the remote) . Do this each time you go in to a different setting. This is on the mega bar 50's non battery ones, but would assume its the same.

Daren

[soundmaster mobile disco]

Thanks guys

I have now figured it out,i was going wrong as when i pressed red it was on full colour 255,blue was also on 255 and so was green.I did not realise you can only have one of them on when you want a solid colour,so i had to select red then make sure both blue and green were at 0.

On the mega tri pars controller adj 3 channel mixer you only have to press the colour and it brings it up.no reducing the other colours to 0