clamps for deck stand booth pro

[hadyn]

hi
im looking to clamp a american dj led light bar onto my deck stand booth at the front so can anyone recommend
any clamps that will fit the square bar at the front and allow me to adapt them to hold the led bar.
thanks

[DazzyD]

I could be way off the mark here but I'd have thought that a standard G-clamp or two would do this job. The ones I use have gripping notched on them and would happily latch on to a square bar.

[Excalibur]

I've got to be missing something here. How can you clamp something to the frame without interfering with the cloth? Buy two and clamp them to the uprights. Simples.

[hadyn]

its simples really apart from what clamp to use
what im trying to do is clamp the led bar about an inch or two above the frame and if you clamp it the correct way then it wont affect the cloth.
well thats the theory anyway and you know how these things work out, you have to play around a bit and experiment untill you get it right.
i can then direct the led bar towards the floor as an extra light when i want.
probably not needed most of the time but i like to experiment some of the time and change things around sometimes.
i have checked the g clamps and rachet clamps in b&q but they will not be sufficient so i will have to search on the internet.
hadyn

[hadyn]

ive decided to drill holes through the metal bar so i can clamp different things to it such as message boards etc
mush easier to bolt things to it now rather than clamps