bmdj
13-04-2014, 04:19 PM
I'm selling my prolyte/ Litestructures Shoplite 3 truss sections. You can have two gantry set ups, 1.8m or 2.8m wide, or you could use the spare base plates to make up some moving head totems, (which was my original intention!)
The truss is 30mm diameter but Global truss 32mm half couplers ( none included) fit this truss as well.
If you have an XPRS Liteconsole this truss matches, as its the same construction; the XPRS console fits nicely in between the 1.8m gantry set up See my photos at a recent gig, below.
Very Lightweight, the longest 2m sections weigh 3.26kg each, the 1m 1.7kg.
There are-
2 x 2m Shoplite 3 Straight lengths
2 x 1m Shoplive 3 Straight lengths
2 x 0.4m by 0.4m Shoplite 3 corners sections
6 x Shoplite 3 base plates, two of which are fixed to two, heavy, 750mm x 260mm x 30mm phenolic plywood bases
4 spare joint inserts
Clevis pins and clips for quick assembly
All items are shown in the photos.I'm selling as I have purchased the XPRS console gantry and only have a small footprint at my regular gig and I'm moving house. Collection only from Rotherham, South Yorkshire near M18 Jct1.
RSD music sell this truss new, I'm looking for £350 for the lot.
PM me if interested or it will be sold to the masses on T'bay.
full technical info http://www.prolyte.com/products/litestructures/decorative-truss/truss/shoplite/shoplite-3#app_field
16528
16529
16530
16531
In use at a recent gig-
16532
16533
The truss is 30mm diameter but Global truss 32mm half couplers ( none included) fit this truss as well.
If you have an XPRS Liteconsole this truss matches, as its the same construction; the XPRS console fits nicely in between the 1.8m gantry set up See my photos at a recent gig, below.
Very Lightweight, the longest 2m sections weigh 3.26kg each, the 1m 1.7kg.
There are-
2 x 2m Shoplite 3 Straight lengths
2 x 1m Shoplive 3 Straight lengths
2 x 0.4m by 0.4m Shoplite 3 corners sections
6 x Shoplite 3 base plates, two of which are fixed to two, heavy, 750mm x 260mm x 30mm phenolic plywood bases
4 spare joint inserts
Clevis pins and clips for quick assembly
All items are shown in the photos.I'm selling as I have purchased the XPRS console gantry and only have a small footprint at my regular gig and I'm moving house. Collection only from Rotherham, South Yorkshire near M18 Jct1.
RSD music sell this truss new, I'm looking for £350 for the lot.
PM me if interested or it will be sold to the masses on T'bay.
full technical info http://www.prolyte.com/products/litestructures/decorative-truss/truss/shoplite/shoplite-3#app_field
16528
16529
16530
16531
In use at a recent gig-
16532
16533