Spirits High
28-05-2015, 01:08 PM
Time for a bit of a change so I'm clearing out some speakers.
Both sets are as new. The DAP pair have been used once and the Altos just plugged in to make sure they work. As seen in pics both have covers. The Altos have the official covers and the DAP are in padded bags.
Pick up from Derbyshire or ask as I'm often out and about .
Prices:
DAP Pair £400 ONO
ALTO's Pair £300 ONO
Spec for DAP pulled from their website:
Active 10/1.4" Speaker
Bang & Olufsen ICE power amp
Loudness switch with automatic tone control at any sound pressure level.
External speaker output (minimal 8Ohm)
Integrated mixer with tone control
Engineered in the Netherlands
Type Speaker: Active multifunctional
Enclosure material: MDF
Sensitivity: 94 dB / 1 Watt / 1 Meter
Max SPL @1m : 124.5 dB
Nom dispersion (HxV): 60° x 40°
Amplification: Class-D, Conventional
Amplifier power: 450 Wrms, 4 Ohm
External speaker: Minimal 8 Ohm
Frequency response: 90 - 17.000 Hz (-3dB)
Inputs: Line & Mic
Tone control: Bass & Treble
Power supply: AC 230 50Hz
Power consumption: 540 Watt
Stand adapter: 35 mm
Mounting points: 3
Safety eye possibility: Yes
Dimensions (LxWxH): 358 x 356 x 453 mm
Net Weight: 20.00 kg
Spec for ALTOs SOLD
TS112A 12" Active 2-Way Speaker
Transducer low: 12" woofer, with 2" voice coil
Transducer high: Neodymium compression driver, 1" exit with 1" voice coil
Power amplification: 800W peak (670W LF + 130W HF), 400W continuous (335W LF + 65W HF)
Frequency Range (-10dB): 54Hz-20kHz
Frequency Response (±3dB): 65Hz-19kHz
Maximum SPL @ 1m: 125dB peak, 122dB continuous
-6dB nominal coverage: (80°/100°H x 60°V)
Active Crossover: 2.5kHz
Connectors: 2 x Mic/Line Female XLR - 1/4" combo inputs, 1 x Loop - Out Male XLR
Input Control: Line / Mic -∞ to +50 dB, Maximum input level +23 dBu, Input Impedance 15 kOhms
External Controls: Volume, Power switch with LED indicator, Clip/Limit LED, Ground Lift switch
Protection Features: Over-excursion, Thermal, Driver
AC Power: 100VAC, or 110-120VAC
Mounting: Integrated pole-socket (36mm dia.) Two handles, 5 M10 threaded sockets: 2 top, 2 bottom, 1 pullback
Dimensions (WxLxH): 648mm x 383.8mm x 365mm
Weight: 35lb.
Piccys Time!
172091721017211172121721317214172151721617217
Both sets are as new. The DAP pair have been used once and the Altos just plugged in to make sure they work. As seen in pics both have covers. The Altos have the official covers and the DAP are in padded bags.
Pick up from Derbyshire or ask as I'm often out and about .
Prices:
DAP Pair £400 ONO
ALTO's Pair £300 ONO
Spec for DAP pulled from their website:
Active 10/1.4" Speaker
Bang & Olufsen ICE power amp
Loudness switch with automatic tone control at any sound pressure level.
External speaker output (minimal 8Ohm)
Integrated mixer with tone control
Engineered in the Netherlands
Type Speaker: Active multifunctional
Enclosure material: MDF
Sensitivity: 94 dB / 1 Watt / 1 Meter
Max SPL @1m : 124.5 dB
Nom dispersion (HxV): 60° x 40°
Amplification: Class-D, Conventional
Amplifier power: 450 Wrms, 4 Ohm
External speaker: Minimal 8 Ohm
Frequency response: 90 - 17.000 Hz (-3dB)
Inputs: Line & Mic
Tone control: Bass & Treble
Power supply: AC 230 50Hz
Power consumption: 540 Watt
Stand adapter: 35 mm
Mounting points: 3
Safety eye possibility: Yes
Dimensions (LxWxH): 358 x 356 x 453 mm
Net Weight: 20.00 kg
Spec for ALTOs SOLD
TS112A 12" Active 2-Way Speaker
Transducer low: 12" woofer, with 2" voice coil
Transducer high: Neodymium compression driver, 1" exit with 1" voice coil
Power amplification: 800W peak (670W LF + 130W HF), 400W continuous (335W LF + 65W HF)
Frequency Range (-10dB): 54Hz-20kHz
Frequency Response (±3dB): 65Hz-19kHz
Maximum SPL @ 1m: 125dB peak, 122dB continuous
-6dB nominal coverage: (80°/100°H x 60°V)
Active Crossover: 2.5kHz
Connectors: 2 x Mic/Line Female XLR - 1/4" combo inputs, 1 x Loop - Out Male XLR
Input Control: Line / Mic -∞ to +50 dB, Maximum input level +23 dBu, Input Impedance 15 kOhms
External Controls: Volume, Power switch with LED indicator, Clip/Limit LED, Ground Lift switch
Protection Features: Over-excursion, Thermal, Driver
AC Power: 100VAC, or 110-120VAC
Mounting: Integrated pole-socket (36mm dia.) Two handles, 5 M10 threaded sockets: 2 top, 2 bottom, 1 pullback
Dimensions (WxLxH): 648mm x 383.8mm x 365mm
Weight: 35lb.
Piccys Time!
172091721017211172121721317214172151721617217