PDA

View Full Version : Denon dn mc6000 mk 1 & VDJ 8


Tony Murphy
21-10-2015, 08:17 PM
Hi

Decided to upgrade to Virtual DJ8 from 7.

Having trouble with the Audio Settings and only getting sound from decks 3&4
I am using 4 decks

Can anyone advise where I am going wrong
djdj
22-10-2015, 09:54 AM
Hi

Decided to upgrade to Virtual DJ8 from 7.

Having trouble with the Audio Settings and only getting sound from decks 3&4
I am using 4 decks

Can anyone advise where I am going wrong

Still playing with 8
But I would say you need to select Extenal mixer then MC6000 on this screen!
Excalibur
22-10-2015, 09:59 AM
Still playing with 8
But I would say you need to select External mixer then MC6000 on this screen!

Seems logical.
fullcontact68
22-10-2015, 10:59 AM
I too have been having issues getting VDJ8 mappings to work correctly with my MC6000 Mk1.

With VDJ7 I had no problems, used channels 1 & 4, everything mapped correctly.


However, when trying to do the same with VDJ8, I cannot seem to get 1 & 4 to map in the same way and in 7.

All I've been able to do so far, is use 3&4. With these, the mappings for the sliders do work within VDJ8. (So I use 3 & 4, instead of 1 & 2 to get the same operation in VDJ8)

I'm still using V7, playing with V8 when I get chance, (Not very often though). I really need to bite the bullet and start using V8.
Tony Murphy
22-10-2015, 02:34 PM
External Mixer is not the answer.

Using the configuration pictured, I get

Treble only on channel 1,
Bass only on channel 2,
full sound on 3&4.

Had no trouble with sound settings on version 7
Crown Jules
22-10-2015, 03:27 PM
In the Source column should you not be listing your decks, rather than Master and Headphones
Crown Jules
22-10-2015, 03:36 PM
...once you've changed the Output to External Mixer of course!
Tony Murphy
22-10-2015, 04:26 PM
Problem solved, had the correct settings, just gave it a reboot and reinstall.

Thanks.
Spirits High
08-11-2015, 08:51 AM
As I've had a quiet couple of weeks I too have made the switch to VDJ8..... I can get it to work properly in 2 deck However, 4 deck mode is not playing nicely!

When cueing decks 3 or 4 with tracks playing on the same fader it obviously plays over the top of it ie: you can hear both tracks. The way I had VDJ7 setup was playing through faders 2 & 3 so how do I get them onto separate faders ie: Deck1 on 1 Deck 2 on 2 etc etc?

I'm hoping I've just missed something really simple and some techy type will point in the right direction.

Current Audio settings are: Output: Speaker / Headphones ard: MC6000

Thanks in advance.