Numptie Question;Speakers; 2 x 2 Inputs - Why?

[SPJ]

Evening Chaps and Chapesses:

Over that last few weeks have been getting together some gear to get back DJing after a sabbatical of about 20yrs :D
I've got hold of a pair of KAMZ1504 speakers and am a bit puzzled as to why there are 2 inputs for each type of connecton.
Is this something to do with rigging up bass speakers, too?

If so, what type of bass speaker would you recommend for rigging up to 1504s and is there actually a need for it in your expert opinions?

All replies welcome.

Cheers

[soundlad]

It maybe a link feature, like you say to some bass cabs

[TonyB]

Evening Chaps and Chapesses:

Over that last few weeks have been getting together some gear to get back DJing after a sabbatical of about 20yrs :D
I've got hold of a pair of KAMZ1504 speakers and am a bit puzzled as to why there are 2 inputs for each type of connecton.
Is this something to do with rigging up bass speakers, too?

If so, what type of bass speaker would you recommend for rigging up to 1504s and is there actually a need for it in your expert opinions?

All replies welcome.

Cheers

Usually the bass speakers have input and output so you would connect from the amp to bass speaker then to the tops.

The dual connectors are more likely to be for use if you want to use a pair of speakers on each channel. As they are 8 ohm each, you could connect two together for 4 ohms.

As they have a 15" driver they will probably be okay without bass speakers but the only way to find out is try them and see.