ILead DMX wiring problem

[DJWayne]

Ok don't know if anyone can help but here goes.

I have an Ilead 0824 dmx controller which works well.

I want to be able to use the stand alone outputs on it for when i am feeling lazy but can't find the wiring diagram for it anywhere. I have checked the user guiide for the controller , trawled the web but to no avail.

The output from the controller is 5 pin xlr and the remote input into the units is jack (same as CA8).

If anyone has run into this in the past and could shed some light on it i would be most grateful :)

[TONYTIGER]

As i can recolect there is two stand alone features on the left of this controller which are just the same as the CA8 easy contoller are your leads missing that come with the controller as you said just a simple 5pin xlr to a stero jack so just order a pair from your ilead dealer or ive got plenty if your stuck TONYTIGER

[DJWayne]

i never had the leads that came with the controller mate all i need to know is which 2 pins i need to solder onto from the 5 pin out to connect to the jack plug as nobody seems to know :)

[TONYTIGER]

Hi Wayne, the info you require is as follows 5 pin xlr pins 4&5 not used pin1 is ground pin 2 is tip pin 3 inner thats a stero jack plug hope that helps

[DJWayne]

Thanks Tony will make a few of those up now :)