Under attack from the dance floor!
I had a cracking party last night in Winchester for a 40th birthday. Also had the photo booth out but it was all so very nearly tainted!
So I've got a T-Bar with moving heads on it and a couple of heads on my table top the t bar out of nowhere starts falling onto the dance floor which is packed except for a very lucky patch just where the stand fell. Because all the heads are dmxed together with cables the heads on the table they fall off and nearly take my controller with them... At this moment I'm thinking three things:
1) thank God nobody was hit by it
2) all of my lights are likely broken
3) how in earth did this happen when nobody was near the stand, all cables are taped down, the stand was perfectly stable when I set it up (I always do a shove test after its set up)!
Utterly baffled I quickly move in the pick the stand and my lights up to find when I try and erect the stand again there is no room for it... But hold on there was loads of room for it when I set it up... So I unplug and move it to the side whilst the guests don't really care and are still dancing... Still confused I notice the dance floor is very close to my speaker stands... Odd they had loads of room when I set up and then I realise the dance floor has moved!
Because the tripod got stuck under my table it softened the landing and the lights seem to be working with no smashed lenses, the only damage I can see if a couple of bent brackets which are cheap as chips but I'm doing a full inspection of the lights in the morning to check.
I asked all the guests to get off the dance floor and kick it back but it was only a temporary measure and the dance floor ended up forcing me back into the wall repositioning all my stands and come midnight I just about had room to get in and out 1ft at most!
The dance floor had moved almost 3ft along the carpet looking back at photos I took of my setup earlier in the night! I lifted a panel to check underneath and was shocked that the battens aren't ribbed and are smooth aluminium! I thought all dancefloors had ribbed battons, really glad the ones I've bought do now I know what can happen if they are not!
First time for everything, it seems I was very lucky this time it could have been so much worse with injury or serious damage to equipment, surely the hotel knows about this problem too :(