Our website is made possible by displaying online advertisements to our visitors.
Please consider supporting us by disabling your ad blocker.
-
-
Thanks for that. I've been wondering about them.
(PS: I've tidied up and merged your posts for you.)
-
Thanks I've had to keep chopping and changing between phone laptop and PC!.........long story
-
Very nice, admittedly a lot more more than shoving a light in the bottom but seems to be a nicer effect.
-
Thanks, I'm hoping to fasten them inside the truss with velco as they are very lightweight.
-
Velcro straps are one of my favorite things, can't imagine how I got on with all my cables before!
-
That's a really nice effect.
Can you post some links to the various components.
Thanks.
-
If you are going to do alot of truss with these then you are best going direct to china for it. www.aliexpress.com
http://www.aliexpress.com/item/Hot-s...743140498.html
Would be ideal. The LEDs in those are the all in one and not 3 separate ones close together so a better colour mix. Find your self a nice DMX PWM controller from there too. If you need a high amp PSU for them then an old computer PSU would supply plenty of juice! I have one here 28A at 5V. Although you may wish to dim them they are very bright! Some resistors in series with the strips would do for a permanent solution. (just make sure that you have the right wattage. Someone smell smoke? )
http://www.aliexpress.com/item/27-ch...431020707.html
Could be a controller for multiple strings. You could have say three strips in series per block for multiple "zones".
For those who can make PCBs:
http://www.mathertel.de/Arduino/DMXSpot.aspx
Last edited by Jiggles; 12-08-2013 at 01:54 AM.
-
I have some sticky velcro you can have to finish the project
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules